Pairing and Connecting
The controller must be powered off before attempting to enter pairing mode.

2.4G

1. Set the mode selection switch to 2.4G.
2. Connect the 2.4GHz wireless adapter to the PC.
3. Tap the Home button. The controller will power on and attempt to connect to the 2.4GHz wireless adapter.

• If the controller has lost its pairing with the dongle, repeat steps 1-2 then press and hold the Home button for 6 seconds until the LEDs animate to indicate pairing mode.

• Bring the controller within range of the dongle to complete pairing.

Bluetooth

1. Set the mode selection switch to Bluetooth.
2. Press and hold the Home button for 6 seconds until the LEDs animate to indicate pairing mode.
3. On your Bluetooth-enabled device, search and connect to “HyperX Clutch.”

USB

1. Set the mode selection switch to USB.
2. Plug the USB-C cable into the controller.
3. Plug the USB-A cable into your PC
4. Windows will recognize the controller as “HyperX Clutch”

Power On – 2.4G or Bluetooth Mode
Press and release the Home Button to power the controller. The controller will attempt to connect to the previously paired device.
 

Power Off
The controller will automatically shut off after 5 minutes of inactivity. The Clutch can also be manually shut off by toggling the mode selector switch.

Handheld Mode
Attach the mobile clip and insert the mobile device.

Tabletop Mode
Fold the clip to use as a phone or tablet.