Cloud Revolver S PC

Usage with USB Audio Control Box (PC)

  • To use the headset to your computer, connect the headset’s 3.5mm plug to the female 3.5mm jack on the USB Audio Control Box, then plug the USB cable into your computer.

Configuration with USB Audio Control Box (Windows)

For optimal surround sound performance configure Windows using the steps below.

1. Right-click the speaker icon in the task tray and select ‘Playback Devices’.

2. Right-click on ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’.

3. With ‘HyperX Cloud Revolver S’ selected click on the ‘Configure’ button.

4. In the ‘Audio channels’ list select 7.1 Surround and click on ‘Next’.

5. In the ‘Optional speakers’ list make sure all boxes are checked then click ‘Next’.

6. In the ‘Full-range speakers’ list make sure all boxes are checked then click ‘Next’.

7. Click ‘Finish’ to save the settings.

8. Click on the ‘Recording’ tab, then right-click ‘HyperX Cloud Revolver S’ and select ‘Set as Default Device’.

Your HyperX Cloud Revolver S is now ready to use.