*If you are experiencing issues using the SoloCast on PS5, please see here first.*
HYPERX SOLOCAST MICROPHONE - HMIS1X
Firmware Update Rev.
Black: 4.1.1.2
White: 4.1.0.4
Part Numbers:
HMIS1X-XX-BK/G
4P5P8AA
519T2AA
Description:
This firmware version enables the following bit depths and sampling rates:
- 16-bit, 96 kHz
- 24-bit, 44.1 kHz
- 24-bit, 48 kHz (Windows default)
- 24-bit, 96 kHz
The update also:
- Changes the status LED behavior from flashing to off when the microphone is muted.
- Fixes an issue that would cause Mac systems to wake up as soon as sleep was entered while SoloCast was connected.
Downloads:
With the release of this update, the SoloCast is also supported on NGENUITY. Please download the HyperX NGENUITY software at:
Once installed, click “Update” on the “Firmware Update Required” prompt. Wait until the firmware is finished updating, then click “Close” on the “All Done!” prompt when it appears.
Notes:
No compatibility issues with any officially supported platforms have been found with the new firmware.
If you are unable to select the new sampling rate / bit depth options after updating, right click Start and open Device Manager. Expand Sound, Video, and Game Controllers. Right-click HyperX SoloCast and uninstall the device. Unplug and replug the SoloCast. Windows should show the Installing Device Driver Software prompt.
Run into issues?
If you run into issues updating the firmware or after you update, please contact our Technical Care team directly:
https://hyperx.com/pages/support